So~Safe Sea Water Reverse Osmosis System
Feed TDS more than 15,000 ppm

• Models & Capacities
• Standard Features For Sea Water Reverse Osmosis
• Additional Features

 

Select Item Model US GPD US GPM cu.mtr/hr Min. Feed TDS (ppm) SSSW10KRO 10,000 6.94 1.58 15,000 SSSW20KR0 20,000 13.89 3.15 15,000 SSSW30KR0 30,000 20.83 4.73 15,000 SSSW50KR0 50,000 34.72 7.89 15,000 SSSW60KR0 60,000 41.67 9.46 15,000 SSSW100KR0 100,000 69.44 15.77 15,000 SSSW120KR0 120,000 83.33 18.93 15,000 SSSW150KR0 150,000 104.17 23.66 15,000 SSSW200KR0 200,000 138.89 31.55 15,000 SSSW250KR0 250,000 173.61 39.43 15,000 SSSW300KR0 300,000 208.33 47.32 15,000 Send for Quotation Upto 1 million US Gallons per Day Note: System design may vary depending upon the Feed Water Analysis.

Standard Features For Sea Water Reverse Osmosis Systems Multistage Centrifugal FEED Pump in SS 304/316L. High quality Cartridge Filter Housing in PP/SS304/316L.Make=Grundfos/Equivalent. FRP Multimedia /Sand Filter. Make High Pressure Vertical Multistage Centrifugal Pump in SS 316L with heavy Industrial motor.=Structural. Highly rated Sediment removal system based on Cartridge Filters (5 micron) Antiscalant Dosing system. Make = Prominent. Skid Mounted Carbon Steel Frame, primed and epoxy coated for maximum corrosion resistance FRP Membrane Vessels that are ASME approved. Make= Codeline /Equivalent. High rejection and guaranteed better performance thin film composite RO membranes that are of FDA Approved and are of Commercial Grade. Make= Dow Chemical (FilmTec) Auto Flushing with feed water every time plants start and stops. Unique panel mounted product and reject flow meter. Make = Blue-White Stainless Steel 316 L back pressure regulator concentrate valve. Sample Permeate ports for each Membrane Vessel. Stainless Steel Glycerin filled panel mounted low and high pressure gauges. Make= WIKA. Digital Salinity Meter. Low-pressure cut-off switch to protect high-pressure pump from being dry run. System Control electrical enclosure =NEMA 4 with indicator lights and relevant selector switches. All low-pressure piping and valves are of UPVC SCH 40 Rating. High-pressure piping will be SS 316L. Unique low voltage safety control and protection. Low level feed water float switch. High-level product water float switch. Equipment is tested and sterilized prior to shipment. All the components are properly tagged and lines are color coded as per international standards. Installation and Operation Manual for easy handling of the unit.

Additional Features Sediment Filter as per system requirement. Fixed displacement pump with all wetted parts in super duplex, polymer and ceramic. (For Sea Water Units only). Energy recovery system. (For Sea Water Units only). Digital pH monitor/alarm. Digital ORP monitor/alarm. RO membranes CIP System. Stainless Piping on product water side. Hour Meter & Volt Meter. Provision for recycle stream in order to enhance the system recovery. Pre-chlorination dosing System. De-chlorination System. pH Balancing System. Sequence and phase failure system. High-pressure switch to cut off the system when the system pressure exceeds the preset value. Product water diverter valve. UV Sterilizer. Ozonator. Product water pressure switch in order to cut off the system if the product pressure exceeds preset value. Integrated So~Wise¨ PLC Control System. Digital Product and reject Flow Meter. Mimic Diagram. Export Crating and Packing. Containerized and Self-powered.